++ Road legal for Switzerland ++
The INMOTION AIR PRO electric scooter is durable and very robust to withstand different climatic conditions. The water protection class for the battery is IPX7, which means it can withstand even immersion for a minute.
This electric scooter has a 400 watt motor in the rear wheel and a lithium-ion battery with an output of 36 V / 12 Ah, with which you can achieve a range of up to 48 km (value tested with a 70- kg driver on a flat route with an outside temperature of 25 ° C and a speed of 25 km / h).
Availability: In stock
CHF 840.00
INMOTION is taking a big step forward with its new light weight electric scooter INMOTION AIR PRO. A serious alternative to the NINEBOT electric scooters with a big battery range and a more powerful motor. A water resistant (IPX7) robust and quite powerful electric scooter at a very competitive price.
The INMOTION AIR PRO electric scooter is durable and very robust to withstand different climatic conditions. The water protection class for the battery is IPX7, which means it can withstand even immersion for a minute.
This electric scooter has a 400 watt motor in the rear wheel and a lithium-ion battery with an output of 36 V / 12 Ah, with which you can achieve a range of up to 48 km (value tested with a 70- kg driver on a flat route with an outside temperature of 25 ° C and a speed of 25 km / h).
For good driving comfort, the eScooter has a front tubeless 10-inch pneumatic tires. The rear wheel is equipped with a puncture proof foam tire. Drum brake on the front wheel and electric brake on the rear wheel.
Regarding the design of the INMOTION AIR PRO electric scooter; It looks sturdy. The headlights are on the handlebars and on the rear fender. The net weight of the INMOTION AIR PRO electric scooter is 17,7 kg. The load weight of the scooter must not exceed 120 kg.
The complete operating manual is supplied with the electric scooter.
Install the handlebars by tightening two screws on each side of the steering column and one screw in the center. The key for tightening is included.
Then complete the assembly by screwing the hinged ring tight with the two screws. With this ring you can wear the INMOTION AIR PRO scooter when it is folded.
Remember to charge the electric scooter before your first ride.
The eScooter comes with a charger, a wrench, a valve extension and the instruction manual.
To fold and unfold the scooter; All you have to do is activate the lock at the base of the steering column and then lock the handlebars using the folding ring that snaps into the rear fender.
With this model, it is not possible to adjust the height of the handlebars or to fold down the handles.
The INMOTION AIR PRO electric scooters are equipped with a screen on the handlebar.
This scooter has an INMOTION Bluetooth app that is compatible with Android and iOS, with which you can update the software regularly, among other things. To switch on the electric scooter, you have to press the "Power" button for 3 seconds.
The display with the battery indicator lights up. Bluetooth connection (1), the battery level (2), the driving speed (3), the switching on of the displays (4) and the ECO driving mode D (standard) or S (sport). The headlights are switched on by briefly pressing the ON / OFF button (5), then the headlight display (10) lights up.
In order to extend the service life of a lithium-ion battery, we strongly recommend charging the battery very regularly and maintaining a charge level between approx. 70% and 100%. Do not allow the battery to charge when it is already full, and never completely discharge the battery.
It can take up to 7 hours to fully charge an INMOTION AIR PRO. It is recommended to purchase a second charger to cut the charging time in half. If you store it for several months, it is important not to fully charge the battery but to keep the scooter with a charge level of approx. 60%.
Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.
It is important to check regularly at least once a month how tight the screws are, as an eScooter is exposed to a lot of vibrations while driving. Also remember to check the tire pressure regularly. On the model, it is advisable to inflate the front tire to a pressure of 45 PSI or approximately 3.5 bar. Your electric scooter is cleaned with a damp sponge.
