++ Road legal for Switzerland ++
A serious alternative to the NINEBOT MAX G30 with a bigger battery and a more powerful motor. Robust to be driven in all weather conditions. 500 Watt scooter with a large battery of 54V / 12,5 Ah reaching an incredible range of up to 80 Km! Front and rear dual suspension, front and rear tubeless tires, disc brake at the back, double charging possibility, and a IPX7 battery which makes it very well protected against water.
Availability: In Stock
From CHF 1045.00
INMOTION is taking a big step forward with its new electric scooter INMOTION S1. A serious alternative to the NINEBOT MAX G30D with a bigger battery and a more powerful motor. A robust and powerful electric scooter at a very competitive price that also has two sockets to charge it with two chargers at the same time.
The INMOTION S1 electric scooter is durable and very robust to withstand different climatic conditions. The water protection class for the battery is IPX7, which means it can withstand even immersion for a minute.
This electric scooter has a 500 watt motor in the rear wheel and a lithium-ion battery with an output of 54 V / 12.5 Ah, with which you can achieve a range of up to 80 km (value tested with a 70- kg driver on a flat route with an outside temperature of 25 ° C and a speed of 25 km / h).
For good driving comfort, the eScooter has a front and rear wheel suspension system, tubeless 10-inch pneumatic tires, a rear disc brake and an electric brake at the front. The height of the handlebar is 127 cm above the ground.
Regarding the design of the INMOTION S1 electric scooter; It looks sturdy. The headlights are on the handlebars and on the rear fender. It also has an LED light under the deck and automatic turn signals when you turn.
The net weight of the INMOTION S1 electric scooter is 24 kg. The load weight of the scooter must not exceed 120 kg.
The complete operating manual is supplied with the electric scooter.
Install the handlebars by tightening two screws on each side of the steering column and one screw in the center. The key for tightening is included.
Then complete the assembly by screwing the hinged ring tight with the two screws. With this ring you can wear the INMOTION S1 scooter when it is folded.
The last step of assembly is the front wheel. Please watch carefully the instruction video available on this page.
Remember to charge the electric scooter before your first ride. This model has two charging sockets that can cut the charging time in half when using two chargers at the same time.
The eScooter comes with a charger, a wrench, a valve extension and the instruction manual.
IMPORTANT: It is possible to charge the electric scooter INMOTION S1 by using two chargers simultaneously. You can order an additional charger INMOTION L9.
To fold and unfold the scooter; All you have to do is activate the lock at the base of the steering column and then lock the handlebars using the folding ring that snaps into the rear fender.
With this model, it is not possible to adjust the height of the handlebars or to fold down the handles.
The INMOTION S1 electric scooters are equipped with a screen on the handlebar.
This scooter has an INMOTION Bluetooth app that is compatible with Android and iOS, with which you can update the software regularly, among other things. To switch on the electric scooter, you have to press the "Power" button for 3 seconds.
The display with the battery indicator lights up. Bluetooth connection (1), the battery level (2), the driving speed (3), the switching on of the displays (4) and the ECO driving mode D (standard) or S (sport). The headlights are switched on by briefly pressing the ON / OFF button (5), then the headlight display (10) lights up.
In order to extend the service life of a lithium-ion battery, we strongly recommend charging the battery very regularly and maintaining a charge level between approx. 70% and 100%. Do not allow the battery to charge when it is already full, and never completely discharge the battery.
It can take up to 7 hours to fully charge an INMOTION S1. It is recommended to purchase a second charger to cut the charging time in half. If you store it for several months, it is important not to fully charge the battery but to keep the scooter with a charge level of approx. 60%.
Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.
It is important to check regularly at least once a month how tight the screws are, as an eScooter is exposed to a lot of vibrations while driving. Also remember to check the tire pressure regularly. On the model, it is advisable to inflate the front tire to a pressure of 45 PSI or approximately 3.5 bar. Your electric scooter is cleaned with a damp sponge.
We have a wide range of accessories:
Masterlock CUFFS has a fastening system that can be attached to the steering column of your eScooter. A safe way to lock your scooter.
You can charge this scooter with two chargers simultaneously.
Leather-style saddle cushion provides a comfortable seat and easy cleaning, adjustable height (50 - 67cm) for a better fit.