Menu

VSETT 8 SWISS EDITION

++ Road legal for Switzerland ++

The VSETT 8 electric scooter is equipped with adjustable front and rear suspensions, front and rear disc brakes, the 8.5 inch front tire is inflatable and the 8 inch rear tire is solid. The 48 V / 15,6 Ah battery life in eco mode reaches 50 km and the charging time is 8 hours with one 2A charger. The scooter has an RFID key for starting. Unlocked EU version also available (40 Km/h).

Availability: In stock

CHF 1270.00

Payment up to 12x
from CHF 105 / month
Vitesse trotinette
20 Km/h
50 Km
21 Kg
500 W
18 deg

Videos VSETT 8 SWISS EDITION

Unboxing KissMyWheels VSETT 8
Aucune vidéo actuellement
Video VSETT 8+
Aucune vidéo actuellement

Product description VSETT 8 SWISS EDITION 

 

The very last electric scooter available only in Switzerland; The electric scooter VSETT 8 Swiss Edition is characterized by design and technical properties. In particular, it offers an RFID key starting system, a double charging socket, an LED light and many other elements as standard, which are described in detail in this article.

1. Technical characteristics:

The VSETT 8 electric scooter is designed for your travels in urban areas. It's relatively powerful with a 600 watt motor in the rear wheel connected to a 48 V / 15,6 Ah battery. The autonomy is approx. 50 km (value on the road at an outside temperature of 20 ° C, tested with a driver of 75 kg on a flat route, and a speed of 25 km / h). It has front and rear suspension that you can easily adjust, an 8.5 inch inflatable tire in the front and an 8 inch solid tire in the rear, the brakes are with discs front and rear.
Note that a solid tire is a little less stable when driving, but you avoid possible flats.

For better driving comfort, the VSETT 8 has a footstool on the back of the footboard that you can lean on. The height of the handlebar is adjustable from 76 cm to 103 cm (from the deck).
In terms of the aesthetics of the VSETT 8 electric scooter; Its dull green color is very modern. The LED bar along the steering column makes you more visible to pedestrians or cars in front of you.

The headlights are in the front and back of the footboard. This model starts with an RFID key that you have to position on the chip reader on the handlebar. This is a very quick and convenient unlocking system.
The net weight of the VSETT 8 electric scooter is 21 kg. The load weight of the scooter must not exceed 110 kg.

 

2. Operating instructions:

If you click on the following link, you will see the complete VSETT 8 user manual that comes with the electric scooter:

Operating instructions VSETT 8

How to assemble the electric scooter:

The electric scooter is delivered assembled in its box. Remember to fully charge the electric scooter before your first ride. The charging time for this model is around 4 hours, it has two charging sockets and it is therefore possible to order a second charger to cut the charging time in half.

The Scooter VSETT 8 comes with a charger, a tool kit, three RFID keys and an instruction manual.

 

How to unfold / close the electric scooter:

To unfold the electric scooter; All you have to do is pull on the metal latch on the underside of the handlebar and unfold the scooter. The lock closes as soon as the handlebar is fully unfolded.

elektro scooter z8 pro

The handlebar height is adjustable between 76 cm and 103 cm on this model. Remember to check regularly that the locking tab is properly tightened to avoid vibrations. The handles can also be folded.

All you have to do is pull out the locking sleeves and flip down the handles.

 

elektro scooter z8 pro 2

How to start the electric scooter:

To switch on the electric scooter VSETT 8, you have to press the "Power" button for 3 seconds. The display will light up immediately.

Driving speed, battery level, mileage and speed are shown on the display. The RFID sensor is located at the bottom of the display. Remember to present your RFID key on the reader before starting the display. To switch off the electric scooter, press and hold the "Power" button for three seconds.

3. Maintenance and care:

How to care for the battery:

In order to extend the service life of a lithium-ion battery, it is strongly recommended to keep the charge level of the battery between about 80% and 100%. Do not charge the battery when it is full (do not leave it to charge overnight), and never discharge the battery completely. When you charge your scooter, be sure to connect the charger to the power supply before connecting the electric scooter.

If you store the electric scooter for several months, it is important not to fully charge the battery but to store the electric scooter with a charge level of approx. 60%. Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.

It can take up to 8 hours to fully charge a VSETT 8. It is therefore recommended to order a second charger in order to cut the charging time in half. Charging a lithium battery should be done under adult supervision. It is also important that you charge your electric scooter away from flammable materials (fabrics, paper, liquids, etc.). You can find more information about maintaining your battery on our blog.

 

4. Maintenance and care:

General maintenance of the electric scooter: It is important to check the tight fit of the screws and the brakes very regularly, but at least once a month, as a scooter is exposed to a lot of vibrations while driving. Also remember to check the tire pressure regularly. With this model, it is advisable to inflate the front tire to a pressure of 3.5 bar (50 PSI).

Your electric scooter is cleaned with a damp sponge. Please note that this model is not waterproof. Do not use water or cleaning fluids for maintenance.

 

 

5. Accessories:

Below is a list of important accessories:

Removable and adjustable seat for Electric Scooter VSETT 8 and VSETT 8+

 VSETT 8 Adjustable seat >

The handlebar bag can be attached directly to the handlebar and allows you to easily take all the items you need with you.

 Head Bar bag >

A helmet is not compulsory in Switzerland, but it is strongly recommended. You can find our range on our accessories page.

eScooter Helmets >

Comments
Looking for another model from CURRUS, DUALTRON, KAABO, VSETT, WEPED? 
Contact us today to get you offer.

Customer reviews

SECURE PAYMENT

our guarantees

KissMyWheels 2024 - All Rights Reserved
cartmenuchevron-down