VMAX VX2 PRO SWISS EDITION

The brand new electric scooter from the Swiss brand VMAX is now available! The Electric scooter VMAX VX2 PRO LT-B is equipped with a 48 V / 10,4 Ah Lithium ion battery for a range of up to 35 Km. Inflatable 10 inch tires, 500 watts motor power, color display showing all information while driving. The maximum load should not exceed 130 Kg. Now also available with a version GT-B with a 16,5Ah battery for a range of up to 50Km.

1. Technical data:

This model from the Swiss brand VMAX is equipped with a powerful 500 watt motor with which you can reach a top speed of 20 km / h on the road (version approved for Switzerland). As if a great motor wasn't enough, the electric scooter VMAX VX2 PRO LT-B also has a 48V (10,4 Ah) battery that can reach almost 35 kilometers on a single charge.
With the electric scooter VMAX VX2 PRO, hills and long journeys are no problem for you! In order not to spoil anything, this electric scooter does not weigh heavily: its own weight is just over 17 kg, so that it can easily be taken on all your commuting trips. The load weight is a maximum of 130 kg.

The VMAX VX2 PRO offers pleasant driving comfort, especially thanks to its color display, which shows all useful information while driving. It also has powerful headlights in the front and rear so you can see and be seen better when the light fades.

During your journeys you can also choose between Eco mode or Sport mode. By combining the best of the latest technologies, the VMAX VX2 PRO electric scooter offers maximum performance, safety and quality. One thing is certain: its performance will not leave you indifferent!

2. Operating instructions:

How to assemble the electric scooter:

Adjust the parking stand to hold the scooter upright, then insert the brake cable into the brake lever opening. Then place the steering head on the handlebar. Fold the handlebar up to activate the folding mechanism.

Connect the handlebar cable and the steering head cable together, then place the steering head on the handlebar. Finally, tighten the four screws to secure the steering head and the handlebar.

How to unfold / close the electric scooter:

To fold up the electric scooter, lift the red safety latch and pull the folding lever. The handlebar can now be moved backwards or downwards. Then snap the hook into the fastening part provided for this purpose.

3. Operating instructions charging:

Before using your electric scooter for the first time, fully charge the battery and do not interrupt the charging process. First, make sure the scooter is turned off and do not turn it on while it is charging. Insert the charging plug into the charging socket of your scooter, then connect the charger to the mains via the mains plug.

During the charging process, the charging indicator lights up red. When it turns green, it means the battery is fully charged.

4. Battery maintenance:

How to care for the battery:

If you store the electric scooter for several months, it is important not to fully charge the battery, but to store the electric scooter with a charge level of approx. 60%.
Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.

5. Maintenance and care:

General maintenance of the electric scooter: It is important to check the tightness of the screws and the brakes very regularly, but at least once a month, as a scooter is exposed to a lot of vibrations while driving. Also remember to check the tire pressure regularly. With this model, it is advisable to inflate the tires to a pressure of 3.5 bar (50 PSI). The front tire is with inner tube and the rear tire is tubeless.

Always inflate with a compressor, a hand pump is not powerful enough. Your electric scooter is cleaned with a damp sponge. Please note that this model is not waterproof.
Do not use water or cleaning fluids for maintenance.

6. Accessories:

Below is a list of important accessories:

850 mm foldable lock. It has a fastening system to fix it on the handlebars of your VMAX VX2 PRO scooter and to always have it with you.

INOKIM Foldable lock >

Mobile phone holder GUB for electric scooters / e-bikes, suitable for mobile phones with a width between 5 and 10 cm.

GUB Phone holder >

A helmet is not compulsory in Switzerland, but it is strongly recommended. The SMART4U helmet is equipped with an LED light on the back.

SMART4U Helmet >

E-TWOW BOOSTER S SWISS EDITION

The electric scooter E-TWOW BOOSTER S SWISS EDITION offers an excellent weight / performance ratio. It's also very compact, in order to be easily taken with you on public transport or in a car.

1. Technical characteristics:

The E-TWOW BOOSTER S SWISS EDITION electric scooter is equipped with a motor with an output of 500 watts in the front wheel. With this motor you can reach a top speed of 20 km / h (the speed is reduced for Switzerland). For braking, it has an electric brake with energy recovery when braking at the front and a mechanical brake at the rear. To operate the front brake, pull a lever on the handlebar; the rear brake is activated by pressing the rear splash guard.

This model is also equipped with a suspension at the front and rear to absorb some of the vibrations that are not absorbed by the hard rubber wheels. A silicone seal is installed on the E-TWOW BOOSTER S Swiss Edition after it has been imported into Switzerland in order to increase the water resistance.

Please note that this electric scooter should only be used on slightly wet roads or in light rain, but under no circumstances in heavy rain or submersion.

The Samsung brand lithium-ion battery delivers 36 V / 8.7 Ah, which enables a range of approx. 35 km (value tested with a 75 kg driver on a flat stretch at an outside temperature of 20 ° C). The battery is located in the footboard, under the driver's feet.

The net weight of the E-TWOW BOOSTER S electric scooter is only 11 kg. Load weight of this electric scooter must not exceed 100 kg.

2. Operating instructions:

How to assemble the electric scooter upon delivery:

Don't worry, the E-TWOW BOOSTER S electric scooter is delivered fully assembled. You don't have to assemble anything. However, remember to fully charge the battery before using it for the first time.

How do I unfold the electric scooter?

To unfold the scooter; You must press on the rear splash guard to release the fastening hook. Then lift the handlebars until the red latch engages in the safety position.

To fold the scooter; You have to press on the red latch and at the same time push the handlebar of the scooter forward.

Use the two buttons on the handles to close and open the handles. Be sure to pull the handles until they stop before lowering them. Use the clamp lock to adjust the handlebar height. Unfold the handlebars and close the lock completely. Be sure to tighten the lock firmly to avoid vibration while driving.

How to start the electric scooter:

The E-TWOW BOOSTER S electric scooter is started by pressing the ON / OFF button for two seconds.

The scooter also has a switch for the light and a switch for the bell. Please note that the "S" switch is deactivated in the Swiss Edition version. The battery level, speed, temperature and mileage are displayed on the color LCD screen.

3. Battery maintenance:

How to care for the battery:

In order to extend the service life of a lithium-ion battery, it is strongly recommended to keep the charge level of the battery between about 80% and 100%. Do not charge the battery when it is already full (do not leave it to charge overnight) and never discharge the battery completely. When you charge your eScooter, it is essential to connect the charger to the mains before you connect the electric scooter. If you store the electric scooter for several months, it is important not to fully charge the battery, but to store the electric scooter with a charge level of approx. 60%.

Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.

4. Maintenance and care:

General maintenance of the electric scooter: It is important to check the tightness of the screws very regularly, but at least once a month, as an eScooter is exposed to a lot of vibrations while driving. Also remember to grease the pins and the spring under the running board regularly. Your electric scooter is cleaned with a damp cloth.

E-TWOW GT + SL SWISS EDITION

The electric scooter E-TWOW GT + SL (SMART Edition) is the most powerful model of the E-TWOW brand. It remains compact and lightweight for easy portability and storage. The latest version is equipped with a drum brake on the rear wheel and a Bluetooth app.

1. Technical characteristics:

The E-TWOW GT + SMART electric scooter is equipped with a motor with an output of 500 watts in the front wheel. With this motor you can reach a top speed of 20 km/h. For braking, it has an electric brake with energy recovery when braking at the front and a drum brake at the rear. An unlocked version with 700 Watts / 40 Km/h is also available but is not road legal in Switzerland.

WARNING: IF YOU SELECT THE SWISS ROAD LEGAL VERSION, THE BLUETOOTH FUNCTION AND THE "S" KEY ON THE DISPLAY WILL BE DEACTIVATED.

To operate the front brake, pull a lever on the handlebar, the rear brake is activated by pressing the brake lever. This model is also equipped with a suspension at the front and rear to absorb some of the vibrations that are not absorbed by the hard rubber wheels.

A silicone seal is installed on the E-TWOW GT + SL after it has been imported into Switzerland in order to increase the water resistance. Please note that this electric scooter should only be used on slightly wet roads or in light rain, but under no circumstances in heavy rain or when the wheels are submerged.
The Samsung brand lithium-ion battery delivers 48 V / 7,8 Ah, which enables a range of approx. 30 km (value tested with a 75 kg driver on a flat stretch at an outside temperature of 20 ° C). The outside temperature plays a very important role in the range; At temperatures below 10 ° C you can lose up to 30% range. The battery is located in the footboard, under the driver's feet.

The net weight of the E-TWOW GT + SL electric scooter is only 13 kg. Load weight of this electric scooter must not exceed 110 kg.

2. Operating instructions:

How to assemble the electric scooter upon delivery:

Don't worry, the E-TWOW GT + SMART electric scooter is delivered fully assembled. You don't have to assemble anything. However, remember to fully charge the battery before using it for the first time.

How do I unfold the electric scooter?

To unfold the scooter; You must press on the rear splash guard to release the fastening hook. Then lift the handlebars until the red latch engages in the safety position.

To fold the scooter; You have to press on the red latch and at the same time push the handlebar of the scooter forward.

Use the two buttons on the handles to close and open the handles.

Be sure to pull the handles until they stop before lowering them. Use the clamp lock to adjust the handlebar height. Unfold the handlebars and close the lock completely. Tighten the lock firmly to avoid vibration while driving.

How to start the electric scooter:

E-TWOW GT + SMART electric scooter is started by pressing the ON / OFF button for two seconds.

The scooter also has a switch for the light, a switch for the bell and an "S" switch (Settings) for the various setting options (speed, lighting, etc.).

The battery level, speed, temperature and mileage are displayed on the color LCD screen.

3. Maintenance and care:

How to care for the battery:

In order to extend the service life of a lithium-ion battery, it is strongly recommended to keep the charge level of the battery between about 70% and 100%. Do not charge the battery when it is already full (do not leave it to charge overnight). Never discharge the battery completely. When you charge your eScooter; It is essential to connect the charger to the mains before you connect the electric scooter.

If you store the electric scooter for several months, it is important not to fully charge the battery. To store the electric scooter with a charge level of approx. 60%.
Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.

4. Maintenance and care:

Also remember to grease the pins and the spring under the running board regularly. Your electric scooter is cleaned with a damp cloth.

5. Accessories:

Below is a list of important accessories:

Masterlock CUFFS has a fastening system can be attached safely to the steering column of your E-TWOW GT.

Masterlock CUFFS >

The Head Bar Case Neutral Bag can be attached directly to the handlebar and allows you to easily take all the items you need with you.

Head bar bag >

Our phone holder is easily mounted of the handlebar of your electric scooter.

Phone holder >

E-TWOW GT + SE SWISS EDITION

The electric scooter E-TWOW GT + SE (SMART Edition) is the most powerful model of the E-TWOW brand. It remains compact and lightweight for easy portability and storage. The latest version is equipped with a drum brake on the rear wheel and a Bluetooth app.

1. Technical characteristics:

The E-TWOW GT + SE electric scooter is equipped with a motor with an output of 500 watts in the front wheel. With this motor you can reach a top speed of 20 km/h. For braking, it has an electric brake with energy recovery when braking at the front and a drum brake at the rear. An unlocked version with 700 Watts / 40 Km/h is also available but is not road legal in Switzerland.

WARNING: IF YOU SELECT THE SWISS ROAD LEGAL VERSION, THE BLUETOOTH FUNCTION AND THE "S" KEY ON THE DISPLAY WILL BE DEACTIVATED.

A silicone seal is installed on the E-TWOW GT + SE after it has been imported into Switzerland in order to increase the water resistance. Please note that this electric scooter should only be used on slightly wet roads or in light rain, but under no circumstances in heavy rain or when the wheels are submerged.
The Samsung brand lithium-ion battery delivers 48 V / 10.5 Ah, which enables a range of approx. 35 km (value tested with a 75 kg driver on a flat stretch at an outside temperature of 20 ° C). The outside temperature plays a very important role in the range; At temperatures below 10 ° C you can lose up to 30% range. The battery is located in the footboard, under the driver's feet.

The net weight of the E-TWOW GT + SE electric scooter is only 13 kg. Load weight of this electric scooter must not exceed 110 kg.

2. Operating instructions:

If you click on the link below, you will find the complete operating instructions for the E-TWOW GT electric scooter:

Operating instructions E-TWOW GT 2020

How to assemble the electric scooter upon delivery:

Don't worry, the E-TWOW GT + SE electric scooter is delivered fully assembled. You don't have to assemble anything. However, remember to fully charge the battery before using it for the first time.

How do I unfold the electric scooter?

To unfold the scooter; You must press on the rear splash guard to release the fastening hook. Then lift the handlebars until the red latch engages in the safety position.

To fold the scooter; You have to press on the red latch and at the same time push the handlebar of the scooter forward.

Use the two buttons on the handles to close and open the handles.

How to start the electric scooter:

E-TWOW GT + SE electric scooter is started by pressing the ON / OFF button for two seconds.

The scooter also has a switch for the light, a switch for the bell and an "S" switch (Settings) for the various setting options (speed, lighting, etc.).

The battery level, speed, temperature and mileage are displayed on the color LCD screen.

3. Maintenance and care:

How to care for the battery:

4. Maintenance and care:

Also remember to grease the pins and the spring under the running board regularly. Your electric scooter is cleaned with a damp cloth.

VSETT 8 SWISS EDITION

The very last electric scooter available only in Switzerland; The electric scooter VSETT 8 Swiss Edition is characterized by design and technical properties. In particular, it offers an RFID key starting system, a double charging socket, an LED light and many other elements as standard, which are described in detail in this article.

1. Technical characteristics:

The VSETT 8 electric scooter is designed for your travels in urban areas. It's relatively powerful with a 600 watt motor in the rear wheel connected to a 48 V / 15,6 Ah battery. The autonomy is approx. 50 km (value on the road at an outside temperature of 20 ° C, tested with a driver of 75 kg on a flat route, and a speed of 25 km / h). It has front and rear suspension that you can easily adjust, an 8.5 inch inflatable tire in the front and an 8 inch solid tire in the rear, the brakes are drum brakes front and rear.
Note that a solid tire is a little less stable when driving, but you avoid possible flats.

For better driving comfort, the VSETT 8 has a footstool on the back of the footboard that you can lean on. The height of the handlebar is adjustable from 76 cm to 103 cm (from the deck).
In terms of the aesthetics of the VSETT 8 electric scooter; Its dull green color is very modern. The LED bar along the steering column makes you more visible to pedestrians or cars in front of you.

The headlights are in the front and back of the footboard. This model starts with an RFID key that you have to position on the chip reader on the handlebar. This is a very quick and convenient unlocking system.
The net weight of the VSETT 8 electric scooter is 21 kg. The load weight of the scooter must not exceed 110 kg.

2. Operating instructions:

If you click on the following link, you will see the complete VSETT 8 user manual that comes with the electric scooter:

Operating instructions VSETT 8

How to assemble the electric scooter:

The electric scooter is delivered assembled in its box. Remember to fully charge the electric scooter before your first ride. The charging time for this model is around 4 hours, it has two charging sockets and it is therefore possible to order a second charger to cut the charging time in half.

The Scooter VSETT 8 comes with a charger, a tool kit, three RFID keys and an instruction manual.

How to unfold / close the electric scooter:

To unfold the electric scooter; All you have to do is pull on the metal latch on the underside of the handlebar and unfold the scooter. The lock closes as soon as the handlebar is fully unfolded.

The handlebar height is adjustable between 76 cm and 103 cm on this model. Remember to check regularly that the locking tab is properly tightened to avoid vibrations. The handles can also be folded.

All you have to do is pull out the locking sleeves and flip down the handles.

How to start the electric scooter:

To switch on the electric scooter VSETT 8, you have to press the "Power" button for 3 seconds. The display will light up immediately.

Driving speed, battery level, mileage and speed are shown on the display. The RFID sensor is located at the bottom of the display. Remember to present your RFID key on the reader before starting the display. To switch off the electric scooter, press and hold the "Power" button for three seconds.

3. Maintenance and care:

How to care for the battery:

If you store the electric scooter for several months, it is important not to fully charge the battery but to store the electric scooter with a charge level of approx. 60%. Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.

It can take up to 8 hours to fully charge a VSETT 8. It is therefore recommended to order a second charger in order to cut the charging time in half. Charging a lithium battery should be done under adult supervision. It is also important that you charge your electric scooter away from flammable materials (fabrics, paper, liquids, etc.). You can find more information about maintaining your battery on our blog.

4. Maintenance and care:

General maintenance of the electric scooter: It is important to check the tight fit of the screws and the brakes very regularly, but at least once a month, as a scooter is exposed to a lot of vibrations while driving. Also remember to check the tire pressure regularly. With this model, it is advisable to inflate the front tire to a pressure of 3.5 bar (50 PSI).

Your electric scooter is cleaned with a damp sponge. Please note that this model is not waterproof. Do not use water or cleaning fluids for maintenance.

5. Accessories:

Below is a list of important accessories:

Removable and adjustable seat for Electric Scooter VSETT 8 and VSETT 8+

VSETT 8 Adjustable seat >

The handlebar bag can be attached directly to the handlebar and allows you to easily take all the items you need with you.

Head Bar bag >

A helmet is not compulsory in Switzerland, but it is strongly recommended. You can find our range on our accessories page.

eScooter Helmets >

E-TWOW GTS Premium

Efficient and sleek with its beautiful orange color, the eScooter E-TWOW GTS PREMIUM is a limited version of the GT+ electric scooter from the E-TWOW brand. This supercharged version is equipped with a 700 watt motor coupled with a 48 V / 9.6 Ah battery. It has a front electric brake with KERS battery regeneration, a rear drum brake, and offers a Bluetooth application. Its 54.6 V / 2 Ah charger can recharge the battery in just 4 hours. The maximum load weight for this robust model is 110 Kg.

1. Technical characteristics:

Limited version of the GT+ electric scooter from the famous E-TWOW brand, the GTS PREMIUM with its orange look is also distinguished by its increased performance. With a 700 Watt motor and a 48 V / 9.6 Ah Samsung battery, this electric scooter will allow you to easily reach a speed of 42 km/h maximum (not approved for Swiss roads). It also has a range of around 30 km on a single charge.

To move around smoothly, the GTS PREMIUM offers front and rear suspensions, as well as 8-inch solid tires: enough to ensure excellent comfort while driving and avoid any punctures.

Thanks to its folding handles, its quick and compact folding as well as its light weight (it weighs only 13 Kg), you can easily transport the GTS PREMIUM according to your desires. The icing on the cake: it can overcome slopes of up to 25 degrees without difficulty.

Offering total safety, this scooter is equipped with an electric brake on the front wheel with a patented KERS energy recovery system, and a drum brake at the rear: enough to move and stop without any difficulty. The GTS PREMIUM will also allow you to be clearly visible day and night thanks to its front and rear LED lights, and has a backlit screen displaying all the useful information on your scooter.

To top it all off, this model benefits from Bluetooth functionality thanks to the E-Twow Connect mobile application (for iOs and Android): enough to effectively manage the performance of the E-TWOW GTS PREMIUM.

Light, compact and robust, this electric scooter is therefore a model of choice for all those looking for sportiness and reliability!

2. Operating instructions:

How to assemble the electric scooter:

No assembly operation is necessary: the eScooter E-TWOW GTS PREMIUM will be delivered to you assembled. However, remember to fully charge your battery before using it for the first time.

How to unfold / close the electric scooter:

In order to unfold the scooter, press on the rear fender to release the fixing hook. Then raise the handlebar to clip the red latch into the safety position.

To fold the scooter, press the red latch and at the same time push the scooter handlebars forward. Then use the two buttons on the handles to close and open them.

If you wish to adjust the height of the handlebar, use the tightening latch provided for this purpose: first unfold the handlebar, then close the latch. Check that it is tight to avoid any vibrations during use.

How to start the electric scooter:

The E-TWOW GTS PREMIUM electric scooter turns on by pressing the ON/OFF button for two seconds under the screen.

You will also find various buttons for light, horn and settings below the screen. The color LCD screen displays the battery level, speed, engine temperature and mileage, among other things. This model has a Bluetooth application that will allow you to adjust the driving parameters from your smartphone.

Please refer to the manual of the electric scooter to learn more about the use of the eScooter E-TWOW GTS PREMIUM.

3. Maintenance and care:

How to care for the battery:

Be sure to maintain a charge level between 70% and 100%. Do not leave the battery charging if it is already full. It is also recommended that you never let your battery drain completely.

To extend the life of your battery, you can store your electric scooter in a place away from humidity and at a temperature of at least 5°C.

To learn more, do not hesitate to consult our complete guide to maintaining a lithium battery on our blog.

4. Maintenance and care:

To avoid damaging it, it is recommended to avoid using your electric scooter in the event of heavy showers or on very cold winter days.

Remember to regularly check the screwed elements of your electric scooter, as well as the condition of the various cables to identify potential signs of degradation (cracks, deformations, etc.). Quarterly, you can oil the folding and wheel axles, as well as the folding mechanism of the handles.

5. Accessories:

Below is a list of important accessories:

A second charger for your electric scooter E-TWOW GTS Premium

Charger E-TWOW GTS >

The handlebar bag can be attached directly to the handlebar and allows you to easily take all the items you need with you.

Head Bar bag >

A helmet is not compulsory in Switzerland, but it is strongly recommended. You can find our range on our accessories page.

eScooter Helmets >

VMAX VX2 EXTREME UNLOCKED

The electric scooter VX2 from the Swiss brand VMAX is now available in a speed-unlocked version only at KissMyWheels ! The Electric scooter VMAX VX2 EXTREME is equipped with a 48 V / 10,4 Ah Lithium ion battery for a range of up to 45 Km. Inflatable 10 inch tires, 500 watts motor power, color display showing all information while driving. The maximum load should not exceed 130 Kg. Also available with a version GT-B with a 16,5Ah battery for a range of up to 70Km. The maximum speed of this scooter is 40 Km/h which is not street legal in Switzerland.

VMAX VX4 UNLOCKED

Version of the VMAX VX4 unlocked available only at KissMyWheels! Available in 48 V / 13 Ah, 18,2 Ah or 23,2 Ah battery, giving a range of 100 km. A 500 Watt rear motor with muscular acceleration! Front and rear suspension, drum brakes, 10-inch tires, color LCD screen, and turn signals. This model is speed unlocked with 35 Km/h maximum speed and therefor not street legal in Switzerland.

EGRET PRO SWISS EDITION

A true concentrate of technology, the EGRET PRO offers perfect finishes, autonomy and handling. Among the many advantages of this electric scooter are its 48 V / 17.5 Ah battery allowing you to easily travel up to 80 km on a single charge; its powerful 500 W motor offering a maximum torque of 27 Nm at full speed; or its state-of-the-art braking system, thanks to 120 mm front and rear hydraulic disc brakes.

1. Technical characteristics:

Efficient, sleek and fun to drive, this new model from the top-of-the-range German brand EGRET promises great performance and unfailing efficiency!

Extremely powerful, the 500 W motor offers an exceptional torque of 27 Nm. This allows the EGRET PRO to give you powerful acceleration, ideal for traveling on sloping roads. In this version approved for Switzerland, you can drive at a maximum speed of 20 km/h during your journeys.

Of excellent quality, the Lithium-ion battery has Samsung cells and offers a range of up to 80 km. This battery is also water resistant, since it meets the IXP7 standard: you will not need Never again be afraid to ride in the rain! As a bonus, the battery charging time is fast (5h30 only), and a 2-year warranty is offered by the manufacturer.

On the safety side, the EGRET PRO has it all:

With a diameter of 120 millimeters, the hydraulic disc brakes are the guarantee of driving with complete peace of mind. And that's not all: powerful LED headlights integrated in the front and rear will make you visible in all circumstances. Indeed, the rear light will indicate all your slowdowns thanks to a system coupling it to the braking system. As for the 40 lux front light, it will allow you to see as in broad daylight.

The 10-inch pneumatic tires provide good handling and come with aluminum mudguards. The EGRET PRO also has a large color LED screen, height-adjustable handlebars and ergonomic handles. In addition, it folds easily and has a kickstand. Weighing 22.5 Kg, this electric scooter has a maximum load weight of 120 Kg.

Another significant advantage: the anti-theft device of the EGRET PRO is directly integrated into the frame, and is activated from the application offered by the manufacturer. From the application, you can also choose your preferred driving mode, check the autonomy of your scooter, but also consult the remaining battery charge time.

In short: a high-end electric scooter synonymous with great sensations, and which will not leave you indifferent!

2. Operating instructions:

How to assemble the electric scooter:

The EGRET PRO electric scooter will be delivered to you assembled: no assembly operation is therefore necessary except mounting of the handle bar.
In the box you will also find a charger, a tool kit, and the user manual. Before your first use, remember to fully charge the battery.

Note that the charging time of the EGRET PRO is very short: its battery only needs 4h30 to be charged to 100%.

How to charge the battery:

Before first use, fully charge the battery of the EGRET PRO electric scooter. It will only take you 5h30 to have a fully charged battery. To charge the battery, first make sure the EGRET PRO is turned off, then connect the charger to the mains BEFORE connecting your electric scooter.

3. Maintenance and care:

How to care for the battery:

Charging a lithium battery should be done under adult supervision. It is also important that you charge your electric scooter away from flammable materials (fabrics, paper, liquids, etc.). You can find more information about maintaining your battery on our blog.

4. Maintenance and care:

Periodically check the condition of the motor and controller cables for signs of tears, twists or damage. KissMyWheels has repair shops in its points of sale in Switzerland.

Your electric scooter is cleaned with a damp sponge. Please note that this model is not waterproof. Do not use water or cleaning fluids for maintenance.

5. Accessories:

Below is a list of important accessories:

EGRET Mate from Tex Lock. Simply fix the Egret generation of e-scooters with the flexible cable lock Egret mate by tex-lock.

EGRET Mate Lock >

The handlebar bag can be attached directly to the handlebar and allows you to easily take all the items you need with you.

Head Bar bag >

A helmet is not compulsory in Switzerland, but it is strongly recommended. You can find our range on our accessories page.

eScooter Helmets >

VSETT APEX 8+ SWISS EDITION

The electric scooter VSETT APEX 8+ SWISS EDITION is perfectly designed for your daily trips in the city. Foldable in seconds, you will easily take your scooter with you in the public transport. The VSETT APEX 8+ (48 V / 16 Ah) is equipped with solid tires of 8 inches, two 250 Watts motors, front and rear disc brakes, adjustable suspension, removable battery. It offers a range of up to 60 Km. The speed unlocked version drives up to 45 Kmh.

1. Technical characteristics electric scooter VSETT APEX 8+:

The new electric scooter VSETT APEX 8+ is equipped with two motors with a rated power of 250 watts. A button on the handlebar allows you to turn the front motor on or off in an instant to save energy or increase the power when needed.

The LG Lithium-ion battery of this electric scooter allows you to maintain a maximum range of 60 km with a power of 48 V / 16 Ah (value tested on a course with a driver weighing 75 kg, on a flat road, at an outside temperature of 20 °C). The battery is located in the deck at the driver's feet. The battery is protected against water. Once you start the VSETT APEX 8+ electric scooter, you can remove the battery.

For braking, this electric scooter has disc brakes on the front wheel and the rear wheel. It also has an adjustable front and rear suspension for better driving comfort.

The front and rear tires are solid with no air and have a diameter of 8 inches.

The net weight of the VSETT APEX 8+ SWISS EDITION electric scooter is 24 Kg.

2. Operating instructions:

How to assemble the electric scooter:

We remind you that we are always at your disposal in our stores to personally deliver your new electric scooter and advise you on its use and maintenance. We will prepare your electric scooter free of charge on site so that you can leave safely.

If you would like to receive your electric scooter directly at home, all you have to do is unfold the handlebar and charge the battery to the maximum before you hit the road.

The electric scooter VSETT APEX 8+ SWISS EDITION comes with a charger and 3 RFID keys.

How to unfold / close the electric scooter:

To fold the electric scooter VSETT APEX 8+ SWISS EDITION, simply pull the metal latch located at the bottom of the handlebars, then unfold the steering column until the latch closes.

The handlebar grips are also foldable: to fold them, simply pull the locking sleeves outward and fold down the grips.

To fold the scooter, always switch it off first, then unlock the collar before folding down the steering column. Finally, lock the scooter collar.

3. Operating instructions display:

How to start the electric scooter VSETT MINI SWISS EDITION :

Press the power button for 2 seconds to turn on / off the VSETT APEX 8+, then use your RFID card to turn it on. Note that in DUAL mode, the scooter runs with both motors, and in SINGLE mode, it uses only one motor.

Please refer to the electric scooter manual for more information on using the electric scooter.

4. Battery maintenance:

How to care for the battery:

Lithium-ion is a powerful component. It is imperative that you never charge your electric scooter VSETT APEX 8+ SWISS EDITION electric scooter without adult supervision. In the event of unusual noises, excessive heat or smoke, you should move the electric scooter outdoors as soon as possible. In order to extend the service life of a lithium-ion battery; It is strongly recommended to keep the charge level of the battery between about 70% and 100%.

Do not charge the battery when it is already full (do not leave it to charge overnight). Never discharge the battery completely. Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.

5. Maintenance and care:

General maintenance of the electric scooter:

It is important to check the tightness of the screws and the brakes very regularly, but at least once a month, as a scooter is exposed to a lot of vibrations while driving. Your electric scooter is cleaned with a damp sponge.

Please note that this model is not waterproof. Do not use water or cleaning fluids for maintenance.

VMAX VX4 SWISS EDITION

Discover this new model from the VMAX brand; the VMAX VX4 electric scooter. Available in 48 V / 18.2 Ah or 23.2 Ah battery, giving a range of 75 km or 100 km. A 500 Watt rear motor with muscular acceleration! Front and rear suspension, drum brakes, 10-inch tires, color LCD screen, and turn signals. This model cannot be unlocked.

1. Technical data:

This model from the Swiss brand VMAX is equipped with a powerful 500 watt motor, which will allow you to reach a maximum road speed of 20 km/h (version approved for Switzerland). The electric scooter VMAX VX4 is available in a 48 V / 18.2 Ah battery for a range of 75 km. There is also a larger 23.2 Ah battery for a max range of 100 km.

Its weight is not its strong point with 28.6 kg on the scale. But its load weight, i.e. the weight of the driver, can reach 150 kg.

The electric scooter VMAX VX4 offers pleasant driving comfort, in particular thanks to its color screen displaying all the useful information during your journey. It also has indicators, a powerful headlight at the front and rear to see better and be seen as soon as the light drops. During your journeys, you can also choose between Eco mode or Sport mode.

2. Operating instructions:

How to assemble the electric scooter:

Connect the handlebar cable and the steering head cable together, then place the steering head on the handlebar. Finally, tighten the four screws to secure the steering head and the handlebar.

How to unfold / close the electric scooter:

3. Operating instructions charging:

During the charging process, the charging indicator lights up red. When it turns green, it means the battery is fully charged.

4. Battery maintenance:

How to care for the battery: