++ Road legal for Switzerland ++
Whether you want to stroll around the city or go to work – with the electric scooter VMAX R90 Wheely Pro Swiss Edition you are free of the traffic stress! The electric scooter is provided with a solid 350-Watt motor and a 36V / 5.2 Ah battery. Has 8.5-inch front and rear pneumatic tires, a pleasing design and two independent brakes.
From CHF 479.00
The R90 WHEELY Pro model by VMAX offers undeniable driving comfort and adequate engine performance.
The electric scooter VMAX R90 WHEELY Pro is equipped with a front wheel motor with an output of 350 watts. With this engine you can reach a top speed of 20 km / h (this speed is limited for Switzerland). This engine power is suitable for drivers with a maximum weight of 90 kg. The lithium-ion battery delivers 36 V / 5.2 Ah and reaches a range between 15 and 20 km (value tested with a 75 kg driver on a flat stretch at an outside temperature of 20 ° C).
The battery is located in the steering column, below the handlebar. It is not removable. The net weight of the VMAX R90 WHEELY Pro electric scooter is 12 kg. According to the manufacturer, the load weight of the scooter should not exceed 120 kg. However, this seems like a high value to us. We recommend that you do not exceed 90 kg.
Clicking the link below will display the complete VMAX R90 WHEELY Pro instruction manual that comes with the electric scooter:
How to assemble the electric scooter:
After opening the box, you have to attach the steering head to the handlebar and connect the brake cable. First loosen the two screws under the red hook so that you can then loosen the plastic cover at the end of the handlebar.
Mount the steering head on the handlebar.
To attach the brake cable, pull the brake lever and insert the silver plug of the brake cable into the opening.
Pull the brake cable through the brake lever tensioner and screw it onto the bracket provided on the handlebar.
Remember to fully charge the battery before using it for the first time.
How to unfold / close the electric scooter:
Place the VMAX R90 Wheely Pro in front of you on the floor. To activate the folding mechanism, pull the lever and then fold the handlebars down.
Snap the handlebar into the bracket provided on the rear fender.
To open the VMAX R90 Wheely Wonka Pro again, release the hook from the rear mudguard and fold the handlebar up until it clicks into place.
With this model, it is not possible to reduce the handlebar height or to fold the handles down.
How to start the electric scooter:
The VMAX R90 WHEELY Pro electric scooter is started by pressing the start button. The display with the battery indicator lights up.
Press and hold the start button for three seconds to switch off the electric scooter.
How to care for the battery:
In order to extend the life time of a lithium-ion battery, it is strongly recommended to keep the charge level of the battery between about 80% and 100%. Do not charge the battery when it is already full (so do not leave it to charge overnight). When you charge your scooter, be sure to connect the charger to the power supply before you connect the electric scooter.
If you store the electric scooter for several months, it is important not to fully charge the battery, but to store the electric scooter with a charge level of approx. 60%. Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.
General maintenance of the electric scooter:
It is important to check the tightness of the screws and the brakes very regularly, but at least once a month, as a scooter is exposed to a lot of vibrations while driving. Also remember to check the tire pressure regularly. With this model it is advisable to inflate the tires to a pressure of 3,5 bar. Your electric scooter is cleaned with a damp sponge. Please note that this model is not waterproof. Do not use water or cleaning fluids for maintenance.
Below is a small list of important accessories:
850 mm foldable lock, available in green or blue. It has a fastening system to fix it to the handlebars of your VMAX R90 WHEELY Pro-Scooter and to always have it with you.
Mobile phone holder GUB for electric scooters / e-bikes, suitable for mobile phones with a width between 5 and 10 cm.
A helmet is not compulsory in Switzerland, but it is strongly recommended. The SMART4U helmet is equipped with an LED light on the back.