++ Not road legal for Switzerland ++
The new electric scooter VSETT 10+ from the brand VSETT is offering an amazing range of up to 150 Km on single drive and 70 Km on dual drive motors. The scooter is equipped with front and rear hydraulic brakes and suspensions to offer the best driving comfort. This electric scooter is available in different batterie powers.
From CHF 2980.00
A very racy yellow-black color for this brand new powerful electric scooter from the VSETT brand. Indeed, the electric scooter VSETT 10+ offers several battery levels with LG cells and two motors with a power of 1400 W each. It offers a range of up to 150 km on one engine (and around 70 km in DUAL mode). The scooter is equipped with front and rear hydraulic brakes and suspensions which will offer you great driving comfort.
This scooter will gradually replace the ZERO 10X
Thanks to its two motors each offering a power of 1400 W, the VSETT 10+ electric scooter will allow you to move in a flash: you can indeed reach a speed of 80 km / h maximum (unlocked version).
Its hybrid suspensions, combining springs and hydraulic shock absorbers, will allow you to ride easily whatever the terrain encountered. In addition, its high resistance shock absorption device and curved handlebars will ensure you comfortable trips in all circumstances.
The smart VSETT 10+ is also equipped with overheating protection, and presents all important information on a large backlit LCD display.
This electric scooter also benefits from a great autonomy: you will be able to cover more than 130 km in a single charge, thanks to its powerful Lithium-ion battery. You will also be able to charge this battery quickly thanks to the presence of two charging ports.
To better protect you and ensure a good driving experience, front / rear LED headlights as well as indicators (activated via a button on the handlebars) are present on the VSETT 10+. It also locks and unlocks via an RFID security system.
The VSETT 10+ electric scooter will be delivered to you assembled: no assembly operation is therefore necessary.
In the box you will also find a charger, a tool kit, three RFID keys, two reflective stickers and the user manual. Before your first use, remember to fully charge the battery.
Thanks to the two charging sockets of this model, you can also cut the charging time in half (if you use two chargers simultaneously).
In order to unfold the scooter, simply unscrew the safety screw, then pull the metal latches located at the bottom of the handlebars, then unfold the steering column.
The handlebar grips are also foldable: to fold them, simply unscrew the locking sleeves outwards and fold down the grips.
To fold the scooter, always switch it off first, then unlock the collar before folding down the steering column. Finally, lock the scooter collar.
Before your first use of the VSETT 10+ electric scooter, remember to fully charge the battery. To do this, first make sure that the scooter is turned off. Then plug the charger into the mains BEFORE plugging in your electric scooter: you will notice that the indicator light turns red while charging. The battery is then fully charged when the light turns green.
Warning: do not charge the batteries below 5 ° C or above 40 ° C.
Press the power button for 2 seconds to turn on / off the VSETT 10+, then use your RFID card to turn it on. Note that in DUAL mode, the scooter runs with both motors, and in SINGLE mode, it uses only one motor.
You also have a "SPORT" mode button on the handlebars of the scooter.
Please refer to the electric scooter manual for more information on using the VSETT 10+.
In order to extend the service life of a lithium-ion battery, it is strongly recommended to keep the charge level of the battery between about 80% and 100%. Do not charge the battery when it is full (do not leave it to charge overnight), and never discharge the battery completely. When you charge your scooter, be sure to connect the charger to the power supply before connecting the electric scooter.
If you store the electric scooter for several months, it is important not to fully charge the battery but to store the electric scooter with a charge level of approx. 60%. Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.
It can take up to 14 hours to fully charge a VSETT 10+. It is therefore recommended to order a second charger in order to cut the charging time in half. Charging a lithium battery should be done under adult supervision. It is also important that you charge your electric scooter away from flammable materials (fabrics, paper, liquids, etc.). You can find more information about maintaining your battery on our blog.
General maintenance of the electric scooter: It is important to check the tight fit of the screws and the brakes very regularly, but at least once a month, as a scooter is exposed to a lot of vibrations while driving. Also remember to check the tire pressure regularly. With this model, it is advisable to inflate the front tire to a pressure of 3.5 bar (50 PSI).
Your electric scooter is cleaned with a damp sponge. Please note that this model is not waterproof. Do not use water or cleaning fluids for maintenance.
Below is a list of important accessories:
Masterlock CUFFS has a fastening system can be attached safely to the steering column of your VSETT 10+.
The INOKIM handlebar bag can be attached directly to the handlebar and allows you to easily take all the items you need with you.
A helmet is not compulsory in Switzerland, but it is strongly recommended. You can find our range on our accessories page.