++ Not road legal for Switzerland ++
We have chosen for you the Z10X assembled with it's biggest battery pack the 60 V / 21 Ah Battery which offers a range of up to 60 Km on single motor mode. This electric scooter is equipped with two motors of 1200 W each, 10 inch inflatable tires, hydraulic front and rear suspensions.
Electric scooter Z10X; With two motors with an output of 1200 W each, hydraulic suspensions and a ventilated disc brake system, the POWER ZERO Z10X electric scooter is a concentrate of emotions that combines performance, safety and comfort. It is equipped with 10-inch inflatable tires and offers a range of 30 to 60 km.
The electric scooter POWER ZERO Z10X is equipped with two motors for a total output of 2400 W. With these powerful motors you can travel at a top speed of 65 km / h.
But a good engine would be nothing without good suspension. The Z10X is therefore equipped with hydraulic front and rear wheel suspension for absolute comfort!
It's lithium-ion battery can reach a range of 30 km to 60 km.
The net weight of the electric scooter Z10X is 35 kg, whereby the loading weight does not exceed 120 kg.
A powerful LED headlight on the front and back of the scooter lets you see and be seen as soon as the lights go out.
Good to know: The Z10X electric scooter is delivered assembled. You don't have to do any assembly steps.
However, remember to fully charge the battery before using it for the first time.
To unfold the scooter, first unlock the collar. Then unfold the steering column. Make sure you slide the clamp down to the bottom of the column. Then lock the collar.
Do not hesitate to adjust the clamping tabs individually and precisely to achieve a firm and complete lock. Adjust screws (a) and (b) so that the column is aligned so that the clamping ring can click into place.
To fold the scooter, always turn it off first. Then unlock the collar.
Be sure to fold down the steering column. Finally, lock the collar.
It is important to fully charge the battery before using the electric scooter for the first time. Make sure the scooter is switched off. Plug the charger into an outlet and turn on the outlet. Plug in the scooter charger.
When the indicator is green, the battery is fully charged.
Turn the key switch on to turn on the Z10X electric scooter and off to turn it off. Briefly press the MODE button (1/2/3) to change the speed. In mode 3 you can climb up to 65 km/h.
Note that when you press the ECO-TURBO button, the speed is limited to 20 km/h. In DUAL mode, the electric scooter rolls with both motors. In SINGLE mode it only runs with one motor. Press the MODE button for 3 seconds to turn the front and rear headlights on or off.
Further information can be found in the complete user manual!
In order to extend the service life of a lithium-ion battery, it is strongly recommended to keep the charge level of the battery between about 70% and 100%. Do not charge the battery when it is already full (do not leave it to charge overnight) and never discharge the battery completely. When you charge your scooter, be sure to connect the charger to the power supply before connecting the electric scooter.
If you store the electric scooter for several months, it is important not to fully charge the battery, but to store the electric scooter with a charge level of approx. 60%. Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.C
Charging a lithium battery should be done under adult supervision. It is also important that you charge your electric scooter away from flammable materials (fabrics, paper, liquids, etc.). You can find more information about maintaining your battery on our blog.
It is important to check the tightness of the screws and the brakes very regularly, but at least once a month, as a scooter is exposed to a lot of vibrations while driving. Also remember to check the tire pressure regularly. With this model, it is advisable to inflate the tires to a pressure of 3.5 bar (50 PSI). Your electric scooter is cleaned with a damp sponge. Please note that this model is not waterproof. Do not use water or cleaning fluids for maintenance.
Below is a list of important accessories:
Folding lock from INOKIM. Made using a unique heat-treated steel. The total length of the folding lock is 78cm. The thickness of the lock steel is 750mm.
The INOKIM handlebar bag can be attached directly to the handlebar and allows you to easily take all the items you need with you.
A helmet is not compulsory in Switzerland, but it is strongly recommended. You can find our range on our accessories page.