VMAX NEW VX2 HUB UNLOCKED

The Swiss brand electric scooter NEW VX2 HUB from VMAX is now available exclusively at KissMyWheels in a speed unlocked version! The eScooter VMAX NEW VX2 HUB is equipped with a lithium-ion battery of 48 V / 13Ah (642 Wh) or 18Ah (874 Wh) for a range of up to 90 km. It features 10-inch tubeless tires, a motor power of 500 watts (peak power 1900 watts), and a color display that shows all information during the ride. It reaches a maximum speed of 35 km/h. The maximum load should not exceed 130 kg. Also available in a legal version approved in Switzerland.

1. Technical characteristics:

The VMAX NEW VX2 HUB is perfect for urban traffic. It has a 500-watt motor (with a peak power of up to 1900 watts) in the rear wheel, powered by a 48-volt / 13-Ah battery (642 Wh). The range is about 70 kilometers (tested with a rider of 75 kg, on a flat surface, at a temperature of 20°C, and a speed of 25 km/h). A version with a 48-volt / 18-Ah battery (874 Wh) for a range of up to 90 km is also available.

Why "HUB"? Because this new version is also available in a "GEAR" version with gears for steep inclines.
Electric Scooter VMAX NEW VX2 GEAR - On KissMyWheels.ch
The HUB version is more classic with a brushless electric motor.

The scooter is equipped with suspension on the front and rear wheels, 10-inch tubeless tires, and drum brakes on both wheels. The electric brake is regenerative, meaning it slightly recharges the battery during braking.

This model features a color TFT screen and turn signals on the front and rear wheels.
The VMAX NEW VX2 HUB weighs 25 kg and can carry a maximum load of 130 kilograms.

2. Operating instructions:

How to assemble the electric scooter:

The electric scooter is delivered assembled in its box. Remember to fully charge the electric scooter before your first ride. The charging time for this model is around 4 hours.

The eScooter VMAX NEW VX2 HUB comes with a charger and an instruction manual.

How to unfold / close the electric scooter:

To unfold the electric scooter; All you have to do is pull on the metal latch on the underside of the handlebar and unfold the scooter. The lock closes as soon as the handlebar is fully unfolded.

How to start the electric scooter:

To switch on the electric scooter VMAX NEW VX2 HUB, you have to press the "Power" button for 3 seconds. The display will light up immediately. Driving speed, battery level, mileage and speed are shown on the display.

The VMAX NEW VX2 HUB has a bluetooth antenna, you can connect your phone to the scooter via VMAX app.

3. Maintenance and care:

How to care for the battery:

In order to extend the service life of a lithium-ion battery, it is strongly recommended to keep the charge level of the battery between about 80% and 100%. Do not charge the battery when it is full (do not leave it to charge overnight), and never discharge the battery completely. When you charge your scooter, be sure to connect the charger to the power supply before connecting the electric scooter.

If you store the electric scooter for several months, it is important not to fully charge the battery but to store the electric scooter with a charge level of approx. 60%. Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.

Charging a lithium battery should be done under adult supervision. It is also important that you charge your electric scooter away from flammable materials (fabrics, paper, liquids, etc.). You can find more information about maintaining your battery on our blog.

4. Maintenance and care:

General maintenance of the electric scooter: It is important to check the tight fit of the screws and the brakes very regularly, but at least once a month, as a scooter is exposed to a lot of vibrations while driving. Also remember to check the tire pressure regularly. With this model, it is advisable to inflate the front tire to a pressure of 3.5 bar (50 PSI).

Your electric scooter is cleaned with a damp sponge. Please note that this model is IPX6, it resists well to water but is not fully waterproof. Do not use water or cleaning fluids for maintenance.