++ Road legal for Switzerland ++
The electric scooter VSETT 9+ is equipped with two motors of 250 Watts each (2 * 650 Watts unlocked version). A very powerful Lithium Ion batterie of 48 V / 15,6 Ah, 19,2 Ah or 21 Ah with LG cells reaching a range of up to 100 km. Front and rear suspension, front and rear disc brakes, 8,5 inflatable tires, RFID starter system. The maximum load should not exceed 120 Kg. The speed unlocked version has 2 * 650 Watts motors and reaches as maximum speed of 50 Km/h.
Availability: End-January 2022
From CHF 1989.00
Smart, powerful, light and comfortable at the same time. The VSETT 9+ electric scooter speed-unlocked version has two motors with a power of 250 W (2 * 650 W for unlocked version) each, powered by a 48V / 15,6 Ah, 19,2 Ah or 21 Ah battery made of high quality LG cells. Offering a range of about 100 km. It is equipped with front and rear spring suspensions, an RFID starting system, disc brakes combined with an electric ABS. And also 8.5 inch inflatable tires. As a bonus: its electric blue color, which will instantly catch you eye!
The VSETT 9+ electric scooter is equipped with two motors each offering a power of 650 W, allowing you to ride without difficulty at a speed of 55 km / h maximum.
To ensure comfortable travel, the VSETT 9+ is equipped with front and rear spring suspensions and has a high resistance shock absorption device: ideal for a smooth ride! Its curved handlebars also promise a pleasant driving experience.
The Lithium-ion battery will allow you to reach a range of approximately 80 km on a single charge (in eco mode and with a single motor). The electric scooter also has two charging ports for more efficiency.
Very light, the VSETT 9+ electric scooter weighs 28 Kg, and its load weight is 120 Kg maximum. Powerful LED headlights (front and rear) paired with turn signals let you see well and be seen after dark. To ensure complete safety, the VSETT 9+ electric scooter has an RFID locking system and intelligent overheating protection.
In addition, all important information is displayed on a large backlit LCD display.
The VSETT 9+ electric scooter will be delivered to you assembled: no assembly operation is therefore necessary.
In the box you will also find a charger, a tool kit, three RFID keys, two reflective stickers and the user manual. Before your first use, remember to fully charge the battery.
Thanks to the two charging sockets of this model, you can also cut the charging time in half (if you use two chargers simultaneously).
In order to unfold the scooter, simply pull the metal latch located at the bottom of the handlebars, then unfold the steering column until the latch closes.
The handlebar grips are also foldable: to fold them, simply pull the locking sleeves outward and fold down the grips.
To fold the scooter, always switch it off first, then unlock the collar before folding down the steering column. Finally, lock the scooter collar.
Before your first use of the VSETT 9+ electric scooter, remember to fully charge the battery. To do this, first make sure that the scooter is turned off. Then plug the charger into the mains BEFORE plugging in your electric scooter: you will notice that the indicator light turns red while charging. The battery is then fully charged when the light turns green.
Warning: do not charge the batteries below 5 ° C or above 40 ° C.
Press the power button for 2 seconds to turn on / off the VSETT 9+, then use your RFID card to turn it on. Note that in DUAL mode, the scooter runs with both motors, and in SINGLE mode, it uses only one motor.
Please refer to the electric scooter manual for more information on using the VSETT 9+.
In order to extend the service life of a lithium-ion battery, it is strongly recommended to keep the charge level of the battery between about 80% and 100%. Do not charge the battery when it is full (do not leave it to charge overnight), and never discharge the battery completely. When you charge your scooter, be sure to connect the charger to the power supply before connecting the electric scooter.
If you store the electric scooter for several months, it is important not to fully charge the battery but to store the electric scooter with a charge level of approx. 60%. Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.
It can take up to 10 hours to fully charge a VSETT 9+. It is therefore recommended to order a second charger in order to cut the charging time in half. Charging a lithium battery should be done under adult supervision. It is also important that you charge your electric scooter away from flammable materials (fabrics, paper, liquids, etc.). You can find more information about maintaining your battery on our blog.
General maintenance of the electric scooter: It is important to check the tight fit of the screws and the brakes very regularly, but at least once a month, as a scooter is exposed to a lot of vibrations while driving. Also remember to check the tire pressure regularly. With this model, it is advisable to inflate the front tire to a pressure of 3.5 bar (50 PSI).
Your electric scooter is cleaned with a damp sponge. Please note that this model is not waterproof. Do not use water or cleaning fluids for maintenance.
Below is a list of important accessories:
Masterlock CUFFS has a fastening system can be attached safely to the steering column of your VSETT 9+.
The INOKIM handlebar bag can be attached directly to the handlebar and allows you to easily take all the items you need with you.
A helmet is not compulsory in Switzerland, but it is strongly recommended. You can find our range on our accessories page.