VMAX NEW VX2 GEAR UNLOCKED

The electric scooter NEW VX2 GEAR from the Swiss brand VMAX is now available only at KissMyWheels in an speed unlocked version! The VMAX NEW VX2 GEAR eScooter is equipped with a lithium-ion battery with 48 V / 10.4 Ah (500 Wh) for a range of up to 50 km. 10-inch tubeless tires, motor power 500 watts (peak 1400 watts), color display showing all information while driving. It reaches a top speed of 35 km/h. The maximum load should not exceed 130 kg. Also available in a street legal version for Switzerland.

1. Technical characteristics:

The VMAX NEW VX2 GEAR is an economical electric scooter, ideal for city trips. It is equipped with a 500-watt motor (with a peak power of up to 1400 watts) in the rear wheel, powered by a 48 V / 10.4 Ah battery (500 Wh). The range is about 50 km (tested with a rider of 75 kg, on a flat surface, at a temperature of 20°C, at a speed of 25 km/h).

Why "GEAR"? Because this model has a motor with a gearbox. This allows it to provide more torque on slopes. However, it is a bit louder and less powerful in terms of speed.

It has suspension on the front and rear wheels, 10-inch tubeless tires, drum brakes on the front and rear wheels. Note that the electric brake is regenerative, meaning it slightly recharges the battery when braking. This model is equipped with a color TFT screen and turn signals on the front and rear.

The VMAX NEW VX2 GEAR eScooter weighs 22.6 kg and carries a maximum load of 130 kg.

2. Operating instructions:

How to assemble the electric scooter:

The electric scooter is delivered assembled in its box. Remember to fully charge the electric scooter before your first ride. The charging time for this model is around 2.5 hours.

The eScooter VMAX NEW VX2 GEAR comes with a charger and an instruction manual.

How to unfold / close the electric scooter:

To unfold the electric scooter; All you have to do is pull on the metal latch on the underside of the handlebar and unfold the scooter. The lock closes as soon as the handlebar is fully unfolded.

How to start the electric scooter:

To switch on the electric scooter VMAX NEW VX2 GEAR, you have to press the "Power" button for 3 seconds. The display will light up immediately. Driving speed, battery level, mileage and speed are shown on the display.

The VMAX NEW VX2 GEAR has a bluetooth antenna, you can connect your phone to the scooter via VMAX app.

3. Maintenance and care:

How to care for the battery:

In order to extend the service life of a lithium-ion battery, it is strongly recommended to keep the charge level of the battery between about 80% and 100%. Do not charge the battery when it is full (do not leave it to charge overnight), and never discharge the battery completely. When you charge your scooter, be sure to connect the charger to the power supply before connecting the electric scooter.

If you store the electric scooter for several months, it is important not to fully charge the battery but to store the electric scooter with a charge level of approx. 60%. Always store the electric scooter in a place protected from moisture and at a temperature of at least 5 ° C.

Charging a lithium battery should be done under adult supervision. It is also important that you charge your electric scooter away from flammable materials (fabrics, paper, liquids, etc.). You can find more information about maintaining your battery on our blog.

4. Maintenance and care:

General maintenance of the electric scooter: It is important to check the tight fit of the screws and the brakes very regularly, but at least once a month, as a scooter is exposed to a lot of vibrations while driving. Also remember to check the tire pressure regularly. With this model, it is advisable to inflate the front tire to a pressure of 3.5 bar (50 PSI).

Your electric scooter is cleaned with a damp sponge. Please note that this model is IPX6, it resists well to water but is not fully waterproof. Do not use water or cleaning fluids for maintenance.